Table of Contents
Advertisement
PLAYBACK SEARCH :
The DVR allows you to easily find sections of recorded video using the Search feature.
Press the SEARCH button to access the "PLAYBACK SEARCH SET" menu.
(1) LAST RECORD : Plays the most recent recording.
(2) FULL LIST
(3) ALARM LIST
(4) TIME SEARCH : Finds video recorded on a specific date and time that is entered.
(5) EXIT
A listing of up to 3000 recordings can be stored in both the ALARM LIST and the FULL LIST.
You can scroll through Recordings using the ▲ and ▼ keys, and navigate between Pages of
Recordings using the ◀ and ▶ keys.
To view a selected piece of video on the list, press the QUAD/ENTER button on the highlighted recording.
The DVR will play that video.
You can stop the video at any time by pressing the STOP button.
Note : When HDD SLAVE is set to "Y", both the SLAVE and MASTER HDD's are searchable.
You can navigate between the Master HDD Search and the Slave HDD Search by pressing the
◀and ▶ keys.
Very Important – After the search is completed it is important to switch the hard drive back to
MASTER for recording to take place on the MASTER HDD. Accidental erasure
of recorded events may occur if the incorrect drive is selected
[ PLAYBACK SEARCH SET ]
[ MASTER ]
1. LAST RECORD
2. FULL LIST
3. ALARM LIST
4. TIME SEARCH
5. EXIT
: Shows a listing of all recorded video on the HDD, sorted by time.
: Shows a listing of all recorded video triggered by an Alarm.
: Exits Search mode.
- 23 -
Advertisement
Table of Contents
