Technical Specifications - Lorex DGN209 Instruction Manual

Technical Specifications

Video format
Network Interface
Protocols
Triggers & Actions
HDD storage
Record mode
Camera input signal
Camera loop back
Main monitor output
Call monitor output
Audio input/ output
Motion detect area
Motion detect sensitivity
Video loss detection
Refresh rate
Recording rate
Dwell time
Picture in picture
Key lock
Picture zoom
Camera title
Video adjustable
Alarm input / output
Time display format
Power source
Power consumption
Operation temperature
Dimension (mm)
Net weight
NTSC/EIA or PAL/CCIR
Ethernet (10100 Base-T)
TCPIP, ICMP, SMTP, HTTP, FTP
E-mail images or images uploaded to FTP site / Remote recording
IDE type, UDMA 66 above, 1 removable HDD supported
Manual / Alarm / Timer/Motion Trigger
Composite video signal 1 Vp-p 75Ω BNC, 9 Channels
Composite video signal 1 Vp-p 75Ω BNC, 9 Channels
Composite video signal 1 Vp-p 75Ω BNC
Composite video signal 1 Vp-p 75Ω BNC
4 audio inputs, (RCA) and 2 audio outputs, (RCA)
15 X 12 Targets per camera (NTSC)/ 15*14 targets per camera (PAL)
256 Levels
Yes
72 IPS for NTSC / 100 IPS for PAL
25 IPS for NTSC / 12 IPS for PAL
Programmable (1 - 10 Sec)
Yes (Moveable)
Yes
2X (Moveable)
6 Characters
Color / Contrast / Brightness Adjustable
Input: TTL input, Hi (5V), Low (GND)
YY/MM/DD, DD/MM/YY, MM/DD/YY, OFF
AC 100-240V +/- 10% switching adaptor
<32W
10 - 40 degrees C
430 (W) x 65 (H) x 300 (D)
5.4 Kgs
Output: COM,/N.O/N.C
44