Table of Contents
Advertisement
Troubleshooting
PROBLEM
HDD not found
No Power
Buttons aren't working when pressed
No recorded video
Timer / Alarm recording isn't working
No video
SOLUTION
Need to insert HDD.
Make sure that the HDD Cartridge is locked, then
press any key to continue.
Check the power source cord connections.
Check that there is power at the outlet.
Check if the system is in Key Lock mode.
Press MENU and ENTER at the same time and
enter password to escape the Key Lock mode.
Check that the HDD has been installed correctly.
Check that Timer / Alarm Enable is set to YES.
Check camera's video cables and connections.
Check monitor's video cables and connections.
Make sure that the camera is receiving power.
43
Advertisement
Table of Contents
