Table of Contents
Advertisement
4. After registering your account, you will receive an e-mail, which contains instructions to activate your account. If you do not
follow these directions within 48 hours, you will need to re-register your account.
5. Login your account.
6. Click on "Account" and "Add Host".
7. Users can set up their own DDNS HOST. For example, the user's Host name is "Lorex.dyndns.org". Click on "Add
Host" to finish the setting. (NOTE: Some routers don't support some DDNS HOSTs.)
digimerge
STEP 3: CONNECTING THE PC TO A ROUTER / ROUTER LOGIN:
NOTE: The following settings are different from router to router. Please read the instructions on your router thoroughly.
1. Connect the PC to the router using the LAN cable (LAN end).
LAN end
POWER
29
Advertisement
Table of Contents
