Connect The Label Maker To A Computer Using A Usb Cable - Brother P-Touch D610BT User Manual

Home > Install Software > Connect the Label Maker to a Computer > Connect the Label Maker to a
Computer Using a USB Cable

Connect the Label Maker to a Computer Using a USB Cable

1. Make sure the Label Maker is turned off before connecting the USB cable.
2. Connect the USB cable to the USB port on the Label Maker, and then to your computer.
3. Turn on the Label Maker.
Related Information
• Connect the Label Maker to a Computer
H-10159
PAGE 33 OF 154 1022 IH-10159VND