Other Connections - LG 48AN96 Series Owner's Manual

Other connections

Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
HDMI
• Supported HDMI Audio format:
(Depending on model)
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
• [General] [Devices]
Deep Colour]
Resolution Frame Rate (Hz)
50
3840 x 2160p
59.94
4096 x 2160p
60
If the device connected to Input Port also supports Ultra HD Deep
Colour, your picture may be clearer. However, if the device doesn't
support it, it may not work properly. In that case, change the TV's
[HDMI Deep Colour] setting to Off.
USB
Some USB Hubs may not work. If a USB device connected through a USB
Hub is not detected, connect it directly to the USB port on the TV.
• Use USB 1 port when connecting a webcam. USB 2 port may not
support some webcam. (Depending on model)
• It is recommended that you use a USB hub or USB HDD with a power
supply. (If the power supplied is not sufficient, the USB storage device
may not be detected properly.)
• It is recommended that you use an external USB HDD with a rated
voltage of 5 V of less and a rated current of 500 mA or less.
10
External Devices
Available external devices are: Blu-ray player, HD receivers, DVD players,
VCRs, audio systems, USB storage devices, PC, gaming devices, and
other external devices.
• The external device connection may differ from the model.
• Connect external devices to the TV regardless of the order of the TV
• Refer to the external equipment's manual for operating instructions.
• If you connect a gaming device to the TV, use the cable supplied with
• In PC mode, there may be noise associated with the resolution,
[HDMI Settings] [HDMI
On
4:4:4 8 bit
4:2:2 8/10/12 bit • In PC mode, some resolution settings may not work properly
4:2:0 10/12 bit
• If ULTRA HD content is played on your PC, video or audio may become
Off
4:2:0 8 bit
• When connecting via a wired LAN, it is recommended to use a CAT 7
port.
the gaming device.
vertical pattern, contrast or brightness. If noise is present, change the
PC output to another resolution, change the refresh rate to another
rate or adjust the brightness and contrast on the [Picture] menu until
the picture is clear.
depending on the graphics card.
disrupted intermittently depending on your PC's performance.
(Depending on model)
cable. (Only when port is provided.)