Quoizel RNL9008WT Assembly Instruction Sheet

6 CORPORATE PARKWAY
, .
GOOSE CREEK SC 29445
. .
www quoizel com
Please go to www.quoizel.com
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Light Source: (1) A21 Medium Base bulb 150W Maximum or
(1) Medium Base Vintage Bulb is recommended but not supplied.
Estimated Assembly Time:
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Package Contents
Mounting Screw
A
x 3
Glass
B Panel
x 4
-
STEP 1 Remove Cage from Fixture Body
A. Unlock lock screws on the bottom of the Fixture Body (C) and
remove the cage from the Fixture Body (C)
C
Figure 1
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
2017 QuoizelInc.
Assembly Instruction Sheet #IS-RNL9008WT
for product cleaning tips. Go to the
20-30 minutes
Fixture Body
C
x 1
.
Socket Assembly
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
For Style RNL9008WT
Care + Maintenance selection.
-
STEP 2 Install Glass Panels
A. Insert the Glass Panel (B) into the
cage. Attach the top edge of the
Glass Panel (B) to the slot in the top
of the cage. Fold tabs in the bottom
edge of the cage to secure Glass
Panels (B).
-
STEP 3 Install the Bulb and Cage
A. Insert the bulb onto the socket and
screw snugly into place.
B. Place the cage back onto the Fixture
Body (C) and secure with previously
Cage
removed lock screws. Hand tighten
until snug.
Lock Screw
1of2
Slot
Cage
Tab
B
Figure 2
Cage
Vintage Bulb
(recommended
but not Supplied)
Figure 3
Socket
Lock Screw
ReleasedDate:2017-10-17