Download Print this page

STRIVR PICO NEO 3 Instruction Manual

Hide thumbs Also See for PICO NEO 3:

Advertisement

Quick Links

Welcome to
Immersive
Learning
PICO NEO 3
DOC-NEO-ACCRDN-01 v1.0

Advertisement

loading
Need help?

Need help?

Do you have a question about the PICO NEO 3 and is the answer not in the manual?

Questions and answers

Summary of Contents for STRIVR PICO NEO 3

  • Page 1 Welcome to Immersive Learning PICO NEO 3 DOC-NEO-ACCRDN-01 v1.0...
  • Page 2 Prepare hardware CHARGING PORT PAUSE HOME: WAKE & RE-CENTER BATTERIES Check controller batteries Charge headset CHARGING READY Make sure insulator tab is removed Charge for 2 hours Controllers take 2 AA batteries each...
  • Page 3 Power on headset & put it on NOTE: On first use, you may be guided through manufacturer headset configuration Unplug and hold power button until indicator light turns blue Loosen dial and rotate straps up, then put on and tighten dial SCREEN ON Make sure not to cover front cameras...
  • Page 4 Set boundary Quick Setup to select a Custom to draw your predefined boundary own boundary Stationary experiences require less space Active experiences require more...
  • Page 5 Connect to wi-fi 01 Tilt thumbstick UP and press IN 02 Make sure Use Wi-Fi is On Hold while pulling trigger 03 Select wi-fi and enter password Menu will appear 04 Select return arrow...
  • Page 6 Log in & train GRIP TRIGGER Use the trigger to point and select Make sure to log off when training is done Make sure not to hold controller buttons down for more than 3 seconds Remember to look all around you | Press to exit training...
  • Page 7 Clean & replace the equipment Wipe all contact surfaces, but not the lenses Place headset and controller in tray and plug in headset Do not power off headset...
  • Page 8: Troubleshooting

    FAQs & troubleshooting...
  • Page 9 The screen is black • Open the battery compartment Try the following solutions in order on the back of the controller and make sure the battery is pushed in until one works: all the way. • You may have pressed the power •...
  • Page 10 USB cable is fully plugged into the adapter and the If the About screen in the headset headset. does not say Connected to Strivr, it cannot transfer training results and Can I reset the boundary area? download training content. If the...
  • Page 11 If that doesn’t mitigate the dizzy feel- ing, VR training may not be for you. Let your manager know if you are unable to complete the training. View complete FAQs and contact support at support.strivr.com...
  • Page 12: Health And Safety Warnings

    Health and safety warnings Nausea & potential USING VIRTUAL REALITY (“VR”) CAN PO- TENTIALLY HAVE UNINTENDED HARMFUL health effects EFFECTS ON YOUR HEALTH OR SAFETY. TO VR may trigger motion sickness in some indi- REDUCE THE RISK OF PERSONAL INJURY, DIS- viduals due to the difference in the field of vision COMFORT, OR PROPERTY DAMAGE, PLEASE and focus points between the real world and the...
  • Page 13: Safety Precautions

    DO NOT USE have entered the area. STRIVR WITHOUT FIRST CONSULTING YOUR Read and follow all setup and operating instruc- DOCTOR OR THE MANUFACTURER OF YOUR tions, and review all recommendations for use of MEDICAL DEVICE.
  • Page 14 Legal Strivr is a registered trademark of Strivr Labs, Inc. Copyright ©2022 Strivr Labs, Inc. All rights reserved. For demonstration kits: The equipment and materials are provided for your personal use and evalua- tion. They may not be copied or reproduced in any way or sold, distributed, or otherwise transferred to any other person without Strivr’s prior consent.