Therafin 08893 Quick Start Manual

Low Profile Summer Winter Hardware
To Install Hardware on Channels:
Step 1: Place the Lateral Thoracic bracket on top of the
L shaped lower spacer (L shape should be at the top).
Step 2: Orient the clamp so the tapered surface is
ABOVE the lever (see below). The lever should always
be in the lower hole.
Step 3: After selecting the correct Lateral Thoracic
height, insert the bolt into a nut in the channel. Press
downward on the lower spacer and upward on the
clamp and then tighten the bolt. This removes play in
the Lateral Thoracic bracket.
Step 4: Install the lever into the lower hole and tighten
into a nut in the channel.
To Adjust Hardware on Channels:
Height Adjustments: Loosen the lever AND bolt to
make height adjustments. Set to correct height and
retighten the bolt. Remember to press downward on
the lower spacer and upward on the clamp while
tightening the bolt. This removes play in the Lateral
Thoracic bracket. Last, tighten the lever.
Width Adjustments: Loosen only the lever to make
width adjustments. Retighten when the correct width is
achieved.
. Page 1 OF 2 ‐ 08893 .