Page 2
구성품 휴대용 케이스 카라비너 aim L11 본체 User Guide 마이크로 화이버 사용설명서 CR2 배터리 (렌즈 청소 전용) 각부 명칭 및 버튼 설명 모드 버튼 전원/측정 버튼 초점 조절 대물렌즈 6배율 접안렌즈 슬로프 On/Off 스위치 레이저 수신부 배터리 삽입부 제품 라벨...
Page 3
핀 모드 기능 작동 시에만 표시 스캔 모드 기능 작동 시에만 표시 고저 차(오르막/내리막)가 보정된 거리 거리 단위 표시(Meter / Yard) 측정 목표 조준용 십자선 측정 목표 탐색 시 깜빡이고 탐색 성공 시 멈추는 측정 박스 배터리 잔량 표시 레이저로 측정된 직선 거리 목표물의...
Page 4
▶ 고저 차(Slope) 기능 [슬로프 ON 목표물까지 고저 차를 자동으로 보정한 거리를 화면 중앙에 표시 직선거리 및 고저 차(+/-)는 화면 하단에 표시 [슬로프 OFF] 목표물까지 직선거리를 화면 중앙에 표시...
Page 5
모드 설정(총 2가지 모드) 전원/측정 버튼을 길게 누르면 핀 모드 켜짐 전원/측정 버튼을 짧게 한번 누르면, 목표물을 찾을 경우 진동과 함께 거리가 표시 전원/ 측정 버튼을 1초 이상 길게 누르면 자동으로 ‘핀 모드’가 켜짐 해당 기능은 2개 이상의 사물이 포착 되었을 경우에 가장 가까운 사물까지의 거리를 제공하고, 핀...
Page 10
Displays when pin mode is activated Displays when scan mode is activated Slope-adjusted distance Distance unit (Meter / Yard) Targeting Crosshair Focus Square (Blinks when searching the target; stops when the target is captured) Battery Indicator Straight Line Distance Height of the Target (uphill: +, downhill: -)
Page 12
SELECTING THE TARGETING MODES (2 MODES TOTAL) Change the targeting modes by pressing the Mode button. Modes will change from Standard ↔ Scan. Press and hold Power/ Measurement button to activate Pin Mode Press the Power / Measurement button to display the distance along with vibration Press and hold the Power / Measurement button for a second to activate Pin Mode Pin Mode is used to display the closest target when two or more targets are found, even if there are any other objects such as tree or rocks behind the pin...
Page 23
How to Obtain Warranty Service or Other Information A/S 접수 경기도 성남시 중원구 상대원동 442-17, 쌍용 IT 트윈타워 A동 507호 피케이테크 한국 전화번호 : 1644-5721(평일 오전 10시~17시, 토/일/휴일 휴무) 홈페이지 : www.golfbuddy.com Toll-free : 888-251-6058 / Fax : 888-441-5237 Email : support@golfbuddyglobal.com Address : 10700 Norwalk Blvd.
Need help?
Do you have a question about the AIM L11 and is the answer not in the manual?
Questions and answers