Table of Contents
Advertisement
The device has an aqua sensor.
aThe aquasensor monitors during
the flush adjusts the turbidity of the
flush water and adjusts the duration
and number of flushing cycles
accordingly.
3.3 Energy Saving Mode
If you do not operate the device for a
long time, it automatically switches
to energy-saving mode.
The energy saving mode is exited
when you operate the device again.
If you do not operate the device
further, it will switch off.
4 Set up and connect
4.1 Unpacking device
PAY ATTENTION!
Objects that remain in the drum and
that are not intended for use with the
device can lead to material and device
damage.
Before use, remove all these items
▶
and the supplied accessories from
the drum.
Completely remove packaging
1.
material and protection from the
device.
→ "Disposal of the packaging",
Page 12
Check the device for visible
2.
damage.
Open the appliance door.
3.
→ "The Ministry in Essence",
Page 32
Set up and connect
Remove the accessories from the
4.
drum.
Close the appliance door.
5.
4.2 Package contents
After unpacking, check all parts for
transport damage and the
completeness of the delivery.
PAY ATTENTION!
Use with incomplete or defective
accessories may impair the operation
of the device or cause material
damage and damage to the device.
Do not use the device with
▶
incomplete or defective accessories.
Replace the accessories before
▶
using the device.
→ "Accessories", Page 31
Remark:The device has been checked
at the factory for correct operation.
Water stains may remain in the
device. The stains disappear after the
first wash.
The delivery consists of: s
Washing machine
sAccompanying documents s
Transport protections
→ "Remove transport locks", page
14
scover caps
sBend for fixing
the water drain hose
4.3 Installation site
requirements
WARNING
Risk of electric shock!
The device contains live parts.
Touching live parts is dangerous.
Do not use the appliance without
▶
a cover.
NL
13
Advertisement
Table of Contents
