Download Print this page

Matterport PRO2 Quick Start Manual

Hide thumbs Also See for PRO2:

Download this manual

SETUP YOUR CAMERA

Gather Equipment

Matterport

3D Camera

Tripod (⅜"-16 UNC mount

that holds 10 lb or 5 kg)

Quick-Release Clamp

(⅜"-16 UNC thread)

Supported Apple iPad or iPhone

with Matterport Capture app

PRO2 QUICK START GUIDE

Get Assembled

Set the tripod to about 5 ft

(1.5 m) high and attach the

quick-release clamp

Slide the camera onto the

clamp and check that its

secure.

Power on the camera and

wait for Wi-Fi light to blink.

Get Connected

Open iPad > Settings > Wi-Fi.

Select your Matterport camera's

network to connect your camera.

Open the Matterport Capture App

and check that your camera is

connected to the iPad.

Tap the + button and you're

ready to scan!

Need help?

Do you have a question about the PRO2 and is the answer not in the manual?

Page 1 PRO2 QUICK START GUIDE SETUP YOUR CAMERA Gather Equipment Get Assembled Get Connected Set the tripod to about 5 ft Open iPad > Settings > Wi-Fi. Matterport (1.5 m) high and attach the Select your Matterport camera’s 3D Camera quick-release clamp network to connect your camera.
Page 2 Review and Upload What’s Next We will build your scans into a 3D space and email you in a few hours when it is ready. Login to my.matterport.com to view When you are done scanning, turn off the camera your spaces.