Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Matterport PRO3
Summary of Contents for Matterport PRO3
- Page 1 User Guide...
-
Page 2: Camera Components
LiDAR Mirror Tripod Mount Tripod Mount Socket Tripod Battery Compartment Bottom panel Rear panel 352 East Java Drive Sunnyvale, CA 94089 U.S.A. PRO3 810-00008 Model Part Taiwan Country of Origin Class 1 Laser 352 East Java Drive 352 East Java Drive Serial Number Sunnyvale, CA 94089 U.S.A. - Page 3 Setup Set up tripod. Adjust height to 4.5 feet (1.37 meters). Attach tripod mount. Screw tightly onto the center column of the tripod base. 4.5 feet 1.37 meters...
- Page 4 Remove Pro3 from case. Gently pull the red tab, and lift from the bottom of the camera.
- Page 5 Insert battery. Place the camera on its side on a flat surface. Align the pins on the battery with the pins within the battery compartment and snap into place.
- Page 6 Mount Pro3 on tripod. Open the clamp on the side of the tripod mount. Align the tripod mount socket on the bottom of the camera with the top of the tripod column, and lower the camera into place. Keep one hand on the top of the camera to hold it steady as you close the clamp to secure it.
- Page 7 Power up. Press and hold the power button (~2 seconds) on the rear panel of the camera, beneath the display screen. Remove the magnetic lens cap. Camera Display Booting Warmup...
-
Page 8: Get Connected
Get Connected Get the app. Download the Matterport app for your iOS or Android device to start using Pro3. Camera Display 2 Confirm camera readiness. Once the camera is done booting, the Ready to Pair symbol will appear on the camera display. - Page 9 Matterport Complies with 21 CFR Made in Taiwan 1040.10 and 1040.11 Contains Pro3 to connect to your camera. If you don’t have except for conformance FCC ID 12345678 with IEC 60825-1 Ed. 3., as described in Laser...
- Page 10 Check the Matterport app or visit When the camera is off, tap the indicates the camera is ready to go.mp/pro3 to look up the error power button to check the battery move to the next scan point. code on the screen.
-
Page 11: Care And Storage
The rotating mirror spins at high speeds both Storage and Temperature during a scan and for a short period after. Do not use or leave your Pro3 at very high temperatures. For your personal protection and to avoid The battery performance will be degraded and its service damage to your Pro3, keep hands, hair, or life will be decreased. - Page 12 matterport.com...
Need help?
Do you have a question about the PRO3 and is the answer not in the manual?
Questions and answers