Download Print this page

Front Runner TEGO WALL Assembly Manual

2 m

Download this manual

Tego waLL ASSEMBLY MANUAL 2 m

Axle dimension 1 m (39.37")

Height approx. 2.20 m ( 86.61")

Page 1 Tego waLL ASSEMBLY MANUAL 2 m Axle dimension 1 m (39.37“) Height approx. 2.20 m ( 86.61“)
Page 2 Tego waLL ASSEMBLY MANUAL 2 m 1. Make sure the base part is even with the edge of the stand. 2. Use a wooden block and a rubber mallet to hammer the base part into the stand. 3. Unscrew all feet by 3-4 cm (1.18“...
Page 3 Tego waLL ASSEMBLY MANUAL 2 m 4. Erect the assembled elements and set them up using the attached back panels. Use the bubble level to check the vertical and horizontal position of the shelf, adjust using the feet if required.
Page 4 Tego waLL ASSEMBLY MANUAL 2 m 7. According to this layout, hook in the rear panels one after another from the bottom to the top. Remove the stabilising rear panels accordingly while doing so. We hope you will enjoy the new shelf.