Input Volume/Microphone Volume Track Bars; Delegate Off/Request Off Buttons - DIS CDS-4000 User Manual

CDS 4000

Input Volume/Microphone Volume Track bars

These track bars are used to display and control the current volume settings of the microphone system. The track
bar position displays the last level sent to the microphone system from the computer while the blue bar displays
the feedback from the microphone system.
To change the current volume level, the track bar can be controlled by mouse. If the control has focus, the
keyboard can be used to control the level.
<Up Arrow>, <Left Arrow>: increments the volume by 1dB.
<Down Arrow>, <Right Arrow>: decrements the volume by 1dB.
<Page Up>, Mouse Click above current position: increments by 5dB.
<Page Down>, Mouse Click below current position: decrements by 5dB.
<Home>: Sets the level to 0dB.
<End>: Sets the level to OFF.
The Input Volume/Microphone Volume Track Bars are located on the Microphone Control Page and the
System Control Page.

Delegate Off/Request Off Buttons

The Delegate Off Button has the same functionality as the Delegate Off button of any chairmen microphones
connected to the microphone system. Pressing the Delegate Off Button will switch off delegate microphones
presently in speak.
The Delegate Off Button is only available when the microphone system is in Automatic
button is disabled in FIFO
Pressing the Requests Off button will empty the current request list.
The Delegate Off/Request Off Buttons are located on the Microphone Control Page.
2
In Automatic Mode delegate microphones are put in speak by pressing the ON/OFF button if the maximum
allowed number of speakers is not exceeded.
3
In Manual Mode delegate microphones are put in the Request List, when the microphone ON/OFF button is
pressed. An operator must put the delegate microphones in Speak using the CDS4000 Commander Software or a
MC4000 Microphone Control Unit. Delegates can still turn the microphone off using the ON/OFF button.
4
In FIFO Mode the delegate microphones are put in speak when the ON/OFF button is pressed until the
maximum number of speakers is reached, then the microphones will be put in the request list. When a
microphone is turned off the first microphone in the request list will be turned on. Usually the maximum number
of speakers is limited to one when FIFO mode is used.
Manual no. 4494, Printed in Denmark, 10/98
4
mode.
Microphone Control Page
2 3
or Manual mode - the
8