Introduction; Normal Version; Demo Version; Contacting Dis - DIS CDS-4000 User Manual

CDS 4000

Introduction

This software is used to control the CDS4000 microphone systems by DIS (Danish Interpretation Systems). The
program is distributed as a DEMO-version free of charge where the actual control of the microphone system is
not implemented, but only simulated, and as a full featured version to control microphone systems of up to 100
or 1000 microphones.
The software is used to display information of the microphone system to the user - who is currently speaking and
in request, how much speaking time have the individual delegates used. To control the microphone system -
switching microphones on/off, controlling the volume and mode of the system. To generate log files of
microphone activity for printing out, and to display fully customizable screens containing information for
display on monitors/projectors.
The software supports international character sets for entering delegate data.

Normal Version

To use this software with a RS4232 card the key code
code can be obtained from DIS. The key of the RS4232 card can be read from the label placed on the RS4232
card. First time the software is started with a new RS4232 card connected, the program will display the key of
the RS4232 card and prompt the user for the key code.
This software will work with microphone systems of up to 100 microphones or up to 1000 microphones
depending on the key code.

Demo Version

This software is for DEMO-purposes only and can not be used to control a DIS CDS4000 microphone system.
To simulate activity in the microphone system please use the CDS4000 Demo Microphone Simulator
Window.
In order to use the software with a microphone system You need a CU4005 or CU4010 Central Unit equipped
with a RS4232 interface card (sold separately/or preinstalled). You also need the full version of this software
together with a key code for the RS4232 card You want to use. The software is sold for use with microphone
systems up to 100 microphones, and for use with microphone systems up to 1000 microphones.
To order a copy of the software contact your local DIS-dealer or DIS Denmark Sales Department.

Contacting DIS

To order a copy of the software contact your local DIS-dealer or DIS Denmark Sales Department.
Danish Interpretation Systems A/S
Vestre Teglgade 8A-D
2450 Copenhagen SV
Denmark
Fax: +45 33854040
Phone: +45 33854041
1
The Key Code enables the software to run with a specific RS4232 Card with the corresponding key. The Key
Code enables the software for up to 100 or 1000 microphones. Find the Key Code on the disk labels.
Manual no. 4494, Printed in Denmark, 10/98
1
for the individual key of the RS4232 card is needed. This
Introduction
4