Remote Start ", Page - Siemens SN73HX60CE Information For Use

Basic setting
SideLight
Tone volume
Wi-Fi
Remote Start
Factory setting
1
Factory setting (may vary according to model)
Display text Selection
1
I01 I00 - I01
1
b02 b00 - b03
Cn0 Cn0 - Cn1
rc1 rc0 - rc2
rE Start with
YES
Confirm with
Basic settings en
Description
While the programme is running, a
strip of light appears on the left-hand
side of the appliance. If the appli-
ance door is not completely closed,
the strip of light will flash. The pro-
gramme has ended when the strip of
light is no longer visible on the left-
hand side.
Switch SideLight on "I01" or off
"I00".
Adjustment of tone volume.
Level "b00" switches the signal tone
off.
Switch the wireless network connec-
tion on or off.
Level "Cn0" switches the wireless
network connection off.
The basic setting "Wi-Fi" is only avail-
able once the appliance is connec-
ted to the Home Connect app.
→ "Home Connect ", Page 36
Activate or deactivate
→ "Remote Start ", Page 37.
The following settings are possible:
¡ With the setting "rc0", the func-
tion is permanently deactivated.
¡ With the setting "rc1", the func-
tion can be selected via the
button.
→ "Activating Remote Start ",
Page 37
¡ With the setting "rc2", the func-
tion is permanently activated.
This basic setting is not available un-
til after you have connected the
device with the Home Connect app.
→ "Home Connect ", Page 36
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
35