Linksys WPS54GU2 Quick Installation page 2

I
On the Wireless Security
Settings screen, select a level
of WEP encryption, 64 Bit Keys
or 128 Bit Keys. Then enter a
Passphrase to automatically
generate a WEP key.
If you would like to enter your
I
WEP key manually, leave the
Passphrase field blank and
enter the WEP key on the next
screen.
Click Next.
J
If you used a Passphrase, then
a WEP key will appear on the
following screen. Otherwise,
J
enter your WEP key in the Key 1
field. Click Next.
K
On the Confirmation screen,
make sure your settings are
correct. Click Yes to save your
new settings.
L
On the Congratulations
screen, click User Install to K
install the PrintServer's driver.
L
Model No.
Install and Configure the
3
PrintServer's Driver
Linksys recommends that you set up
your printer and install your printer's
driver before you install the
PrintServer's driver.
A
On the Print Server Driver Setup
Welcome screen, click Next.
A
B
On the Choose Destination
Location screen, select the
location where the driver's
folder will be installed. If you
want the folder to be installed
in a different location, click
Browse and select the
location. Click Next.
C
The Select Program Folder
B
screen will appear. An icon will
be added to the program
folder listed. If you want, you
may change the name of the
program folder. Click Next.
D
After the driver is installed, the
Setup Complete screen will
appear. Make sure Configure
Print Driver now is selected.
C
Click Next to end the driver
installation and begin the driver
configuration.
D
E
Double-click the Print Driver
Setup icon on your desktop. If
you do not see the icon, click
Start, Programs, Print Server
Utility, and Print Driver Setup.
F
Read the Information screen,
and click OK. E
G
On the Printer Port Setup
screen, select a printer port to
add, and click Next.
H F
You will be informed that the
PrintServer Port has been
added successfully. Click OK.
I
The Configure Printer Port
screen will appear. Your
installed printer(s) will appear in
the Existing Printers field. Select
the printer you want, and click
the Connect button to
G
associate the printer with your
selected printer port. To add
another printer, click Add New
Printer and follow the on-
screen instructions.
H
I
J
When you have finished
configuring the PrintServer's
driver, click Close on the Printer
Port Setup screen.
Congratulations! The installation of
the PrintServer is complete.
J
For additional information or troubleshooting
help, refer to the User Guide on the Setup CD-
ROM. You can also call or e-mail for further
support.
24-hour Technical Support
800-326-7114
(toll-free from US or Canada)
E-mail Support
support@linksys.com
Website
http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2003
Cisco Systems, Inc. All rights reserved.
WPS54GU2-QI-30826NC JL