shopPOPdisplays 18005 Assembly Instructions

#18005 Wood and Acrylic 2 Tier Countertop Display
ASSEMBLY INSTRUCTIONS

PARTS LIST:

SIDE PANEL
(2 pcs)
*Recommended: 1 Person Assembly
**No Tools Necessary
STEP 1: On an even flat surface stand both Side Panels upright, as shown below.
While holding the Side Panels upright, simultaneously insert the tabs of
the Shelf panels into the two horizontal slots of both Side Panels.
NOTE: Orientation of the Shelf is critcal and is shown in image below.
Side Panel
STEP 2: Insert the Uprights into the top and middle vertical slots on the
Side Panels, as shown below.
shopPOPdisplays makes no claim that these assembly instructions cover all details, conditions or variations, or that they cover all possible contingencies in connection with the assembly or installation of
this product. It is the Purchaser's responsibility to ensure that all components of this product are properly assembled and installed in accordance with these instructions. shopPOPdisplays assumes no
obligation or liability on account of any third-party recommendations, opinions or advice as to the assembly or installation of this product.
READ ALL INSTRUCTIONS BEFORE YOU BEGIN. DO NOT JUMP AHEAD OF ANY STEP.
SHELF
(2 pcs)
Shelf
Upright
UPRIGHT
FRONT UPRIGHT
(2 pcs)
GRIPPER
(2 pcs)
(1 pc)
DIVIDER
(2 pcs)
1 3
page of