Table of Contents
Advertisement
When pulse counter reaches a specific value. This only works when DI
Counter
works as counter mode.
When the value reaches any threshold.
Is continued for: the analog value should last for some time.
Set lockout time: after the lockout time, IOT-C300-4G device will
Channel/4-20
detect if analog value matches the condition. 0 means this IF condition
m
A/0-10V/
will only be detected once.
PT100
Note: for IOT-C300-4G cellular version, if this Modbus channel quantity
is more than 1, this condition will only judge the first value.
Received a
When IOT-C300-4G device receive a specific message from server.
message
The Device
Reboot the device.
Restarts
When IOT-C300-4G cellular signal is lower than 10 asu, this only
The signal
works with IOT-C300-4G cellular version.
strength is
weak
3. Set THEN action according to your request. You can add at most 3 actions in one command.
Action
Send a custom
Send a custom message to the server.
message
DO can be set to normally open/normally closed/change status. Delay
Time: this action will trigger after a specific time; Duration: the output
Output Trigger
status will last for a specific time, 0 means
Restart the
Reboot the device.
Device
This only works with IOT-C300-4G cellular version and the SMS
Send a device
Report feature is enabled.
status message
via SMS
Description
25
Advertisement
Table of Contents
