Table of Contents
Advertisement
settings should be the sameas the RS485 terminal devices.
Parameters
Enable
Allow the device to collect RS485 data and upload the data.
Stop Bit
1 bit/2 bit are available.
Data Bit
8 bit is available.
Parity
None, Odd and Oven are available.
Baud Rate
1200/2400/4800/9600/19200/38400/57600/115200 are available.
Execution
The execution interval between each Modbus channel command.
Interval (ms)
The
Max Resp Time
the reply to the command. If it does not get a response after the
(ms)
max response time, it is determined that the command has timed out.
Max Retry Time
Set the maximum retry times after device fails to read data from
(ms)
RS485 terminal devices.
3. Click
to add Modbus channels, then save configurations.
maximum
response
Description
time
that
the
IOT-C300-4G
waits
for
19
Advertisement
Table of Contents
