Table of Contents
Advertisement
UCS-2: send Unicode characters and suit for more languages like
Chinese, Korean and Arabic, can contain up to 70 characters.
Enter the NTP Server's IP address or domain name. After registered
NTP Server
to network, the device will sync the device time from this server.
Default: www.ntp.org
Change Password
Change the password to loggin ToolBox and SMS password validation.
Application Settings:
Go to "Application -> Application" to configure the settings to send data to
corresponding servers. About the MQTT topics, please refer to the IoT-C300-4G Cellular
Communication Protocol .
Parameters
Application Mode
Select from "Linovision IoT Cloud", "AWS", "TCP", "UDP", and "MQTT".
The interval of reporting interface data. Default: 1800s,Range: 10-64800s
Reporting
Note: for Linovision IoT Cloud mode, the reporting interval
Interval (s)
should be configured on the cloud webpage.
Linovision IoT Cloud
Keep Alive
After connected, the device will send heartbeat packet regularly to keep
Interval (s)
alive. Default: 200 s, Range: 1-3600 s
AWS
Server Address
Fill in the AWS server domain name which the data sends to.
Keep Alive Interval After connected, the device will send heartbeat packet regularly to keep alive.
Description
13
5
Advertisement
Table of Contents
