Delta ETH10-2WIRE-SET User Manual page 5

SET OF UTP / 2-WIRE CONVERTERS FOR LAN+POE TRANSMISSION ETH10-2WIRE-SET 2 PCS
These factors should be taken into account when selecting the power supply voltage of the ETH10-2WIRE-TX transmitter.
3 mode:
Local power supply at the camera.
The camera is powered by PoE directly from the ETH10-2WIRE-RX receiver.
The ETH10-2WIRE-RX receiver will work correctly in the DC IN 10-56V voltage range, however the camera connected to the receiver usually
requires PoE power supply at 44-56V.
These factors should be taken into account when selecting the power supply voltage of the ETH10-2WIRE-RX receiver.
The ETH10-2WIRE-TX transmitter can, in this configuration, work with any PoE standard.
3 mode:
The camera is powered by PoE directly from the ETH10-2WIRE-RX receiver.
The ETH10-2WIRE-RX receiver will work correctly in the DC IN 10-56V voltage range, however the camera connected to the receiver usually
requires PoE power supply at 44-56V.
These factors should be taken into account when selecting the power supply voltage of the ETH10-2WIRE-RX receiver.
The ETH10-2WIRE-TX transmitter in this configuration can work with the DC IN 10-56V power supplied to the POWER connector.
Possible settings:
1 - 1 mode
2 - 2 mode
3 - 3 mode
PACKAGE
DELTA-OPTI Monika Matysiak; https://www.delta.poznan.pl
POL; 60-713 Poznań; Graniczna 10
e-mail: delta-opti@delta.poznan.pl; tel: +(48) 61 864 69 60
2022-11-15
User Manual
Code: ETH10-2WIRE-SET
SET ATTE
ETH10-2WIRE-SET 5/6