Edit Pon Threshold - Baudcom BD-PON-J310G User Manual

SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD
3.4.2 PON Power Meter Test
4.4.2.1 Interface of PON Network Power
5.This is PON power meter module. You can see the interface through press "Function
selection keys" or "Menu" back to the interface. As shown in figure 4.2.1
4.2.1
4.2.2 Instructions for Normal Optical Power Meter Function
After open the instrument, switch to the Normal optical power Meter Module. Clean the
tested optic cable, connect with instrument. The optical adaptor will be break, and the
tested value will be faulty if the un-matched adaptor connected
If the power within the measuring ranger of instrument, the screen can show the correct
measurements. If you want to save the data ,Please press "Confirm" key
In this interface, you can update reference value through press
value will be displayed on the screen. The unit of reference value is "dB".
If you want to view reference value records press "Up" key until you can see the "reference
value";

Edit PON Threshold

In the interface of threshold selection , You can set the threshold group , the name and the
threshold parameter corresponding to the channel
In this interface, press the direction keys to set the selected object, press the "Enter" key to
enter edit mode, it can be edited by direction keys, press "Enter" key to save. As shown in Figure
4.3.1
4.2.2
"Ref" key, and the reference
- 4 -