Singer Fashion Mate 237 Instructions Manual page 8

THREADING THE MACHINE (continued)
6
WINDING THE BOBBIN
(continued)
2 Place empty bobbin on spindle.
3 Move bobbin winder lever to the
right.
4 Place spool of thread on spool pin
over the spool pin felt and pass
thread around bobbin winder ten-
sion bracket disc.
5 Draw thread, from the inside,
through a hole in the top side of
the bobbin.
6 Hold thread end as shown and start
the machine. Thread end will
break off after a few coils have
been wound.
7 Do not guide or hold thread while
winding bobbin – let the machine
do the work. Winding will stop
when bobbin is full.