PRESYS
| Instruments
2.0 - Installation
2.1 - Mechanical Installation
The DCY - 2050 and 2051 controller front panels are 1/8DIN size (48 x 96mm).
They are attached from the rear by two rails which push the instrument against
the panel.
After preparing a 45 x 92mm panel cutout, remove the two rails and slide the
instrument from the front until it touches the panel and from the rear engage the rails in
the controllers tightening the screws, as illustrated in figure 2.
Fig. 2 - Dimensional drawing, panel mounting cutout and side view
DCY-2050 and DCY-2051
Installation
Page 7