Figure C-4: Ip Filter List; Figure C-5: Filters Properties; Figure C-6: New Rule Properties - Linksys WAG54GP2 User Manual

Wireless-G ADSL Gateway with 2 Phone Ports
3. The Filters Properties screen will appear. Select the Addressing tab. In the Source address field, select My IP
Address. In the Destination address field, select A specific IP Subnet, and fill in the IP Address: 192.168.1.0
and Subnet mask: 255.255.255.0. (These are the Gateway's default settings. If you have changed these
settings, enter your new values.)
4. If you want to enter a description for your filter, click the Description tab and enter the description there.
5. Click the OK button. Then, click the OK or Close button on the IP Filter List window.
Filter List 2: Router ->win
6. The New Rule Properties screen will appear. Select the IP Filter List tab, and make sure that win -> Router
is highlighted. Then, click the Add button.
Appendix C: Configuring IPSec between a Windows 2000 or XP Computer and the Gateway
How to Establish a Secure IPSec Tunnel

Figure C-4: IP Filter LIst

Figure C-5: Filters Properties

Figure C-6: New Rule Properties

96