Installation
Your Detector
Intro
Operation
Customer
Warranty
Assistance
Dashboard Mounting
1.
Place the detector on the dashboard to find a location
where the unit has a clear, level view of the road.
Secondary Icons
The angle can NOT be adjusted after mounting.
2. Remove the paper backing
from one side of the hook-
and-loop fastener.
Notice
3. Attach the pad to the
dashboard at your chosen
location and remove the
other paper backing.
4. Attach the detector to the
hook-and-loop fastener.
You can remove and
reattach the unit as
often as you like.
6. Plug the power cord
into the detector.
7. Plug the cigarette lighter
adapter on the power
cord into your vehicle's
cigarette lighter.
4
English
Getting Started
Your Detector
Intro
Operation
Customer
Warranty
Getting Started
Assistance
Power On
h
X K Ka V S
Secondary Icons
On-Off/
Main Icons
Volume Control
Notice
Rotate clockwise
(away from you)
Intro
Operation
Customer
Warranty
To Turn On the Unit and Adjust the Audio Volume
Assistance
Rotate the On-Off/
Tone
Volume control
Three beeps
clockwise (away
from you).
Secondary Icons
NOTE
In some vehicles, power is supplied to the cigarette lighter even while the
ignition is Off. If this is the case with your vehicle, you should turn Off
Notice
or unplug your detector when parking for lengthy periods.
Auxiliary Audio Jack
The Auxiliary Audio Jack can be used to connect external speakers in
environments with high ambient noise levels. The internal speaker will
be disconnected. (This uses a mini stereo audio connector.)
•
Visual Display
h
appears in the display
indicating that the power
is On
•
Auxiliary
Audio Jack
Nothing Comes Close to a Cobra
®
5