Confirming Installation - Sony VAIO VGP-WKB1 Operating Instructions Manual

6
7
To stop using the keyboard and mouse
Disconnect the receiver from the USB port of the computer.
You can disconnect and connect the receiver without turning the computer
off. By setting the power switch of the keyboard or mouse to OFF, you can
conserve battery power.

Confirming installation

Perform this procedure with the receiver connected.
1
2
3
4
Press the Connect button on the receiver again.
Press the CONNECT button on the mouse.
Communication with the mouse starts.
Note
Another VGP-WKB1 being used nearby may interfere with communications
between the keyboard and mouse and the receiver. Enable communication at
different times or at a distance from each other.
Click "Start," and then "Control Panel" .
Click "Performance and Maintenance", and then click
"System".
Click the "Hardware" tab, and then "Device Manager".
Confirm the following:
1 Click the "+" mark on the left of "Human Interface Devices" and
confirm that "USB Human Interface Device" is displayed.
2 Click the "+" mark on the left of "Mice and other pointing devices"
and confirm that "HID-compliant mouse" is displayed.
GB
9