Related Manuals for Linksys USBDSL1
Summary of Contents for Linksys USBDSL1
-
Page 1: User Guide
Instant Broadband Series ADSL USB Modem Use this guide to install the following: Model No.: USBDSL1 User Guide... - Page 2 Package Contents • Instant Broadband ADSL USB Modem • One USB Cable • One Setup CD-ROM • One User Guide and Registration Card • One RJ-11 Telephone Wire (not shown) System Requirements • Windows 98, 2000, or Millennium • 300+ mHz Pentium II CPU or compatible system •...
- Page 3 The ADSL USB Modem’s Rear Panel Ports USB Port Use this port to connect the USB cable from your PC to your modem. ADSL Port This port connects your modem to your ADSL line. The ADSL USB Modem’s Front Panel LEDs ADSL This LED will light up when an...
- Page 4 3. Select “Search for the best driver for your device” and click Next. 4. Select CD-ROM drive as the location where Windows will search for the driver software and click Next. Instant Broadband Series ADSL USB Modem 5. Windows will notify you that it is ready to install the driver. Click Next. 6.
- Page 5 Installing the Modem Driver for Windows Millennium 1. Start up your PC in Windows Millennium. Windows will detect new hard- ware connected to your PC. 2. When Windows asks you for the location of the best driver, select “Automatic search for a better driver (Recommended)” and click Next. Instant Broadband Series ADSL USB Modem...
- Page 6 5. If Windows asks you for the location of Windows Millennium files, direct your PC to the location of the files and click OK. Your driver installation for Windows Millennium is now complete. Instant Broadband Series ADSL USB Modem Installing the Modem Driver for Windows 2000 Windows 2000 will automatically detect the ADSL USB Modem once it is con- nected to the PC.
- Page 7 ADSL USB Modem 3. Select “Search for a suitable driver for my device” and click Next. 4. Windows will now search for the driver software. Select CD-ROM drives and click Next. ADSL USB Modem 5. Windows will notify you that it is ready to install the driver. Click Next. 6.
- Page 8 Now that your installation is complete, you are ready to use your ADSL USB Modem’s Configuration program. The configuration is modified through the Linksys ADSL USB Adapter Properties screen. You may access this screen one of two ways: 1. Right click on the Modem Icon in the system tray (the area next to the clock) as pictured here.
- Page 9 Start, Settings, Control Panel, and click on the Linksys ADSL USB Modem icon, shown below. 3. The Linksys ADSL USB Adapter Properties window will appear, displaying your current data packet information and whether your DSL connection is up or down. You...
- Page 10 6.Click on the AAL Link Statistics tab to display information about your AAL Adaption Layer. 7. Click on the AutoLog tab to display logging activity. Click on Enable AutoLog Tool to activate this feature. Instant Broadband Series ADSL USB Modem 8.
- Page 11 Series ADSL USB Modem 12. Press <Alt>+P from the Linksys ADSL USB Adapter Properties screen to display the Properties window below. As you will notice, this screen con- tains many of the tabs discussed earlier. The General tab displays more detailed information about your modem connection.
- Page 12 14. For information on each of the following tabs, refer to the pages of this guide indicated below: ATM Link Statistics - page 17 AAL Link Statistics - page 18 Protocol Setup - page 21 ATM OAM Loopback - page 19 TCP/IP - page 20 Conection - page 18 AutoLog - page 17...
-
Page 13: Troubleshooting
WinPoet or Enternet 300 logon software on the RFC 1483 driver. a. Go to Start, Settings, Control Panel, and click on Add/Remove Programs. b. Highlight Linksys ADSL USB Modem. c. Close the Control Panel window, and remove the program. - Page 14 © Copyright 2000 Linksys, All Rights Reserved.
Need help?
Do you have a question about the USBDSL1 and is the answer not in the manual?
Questions and answers