Sena RC3 Manual

Also See for RC3:

Quick start manual (2 pages)

Table of Contents

Contents

1 Overview
2 Getting Started
3 Installation
4 Button Operation
5 Power On/Off
6 Battery Check
7 Bluetooth Pairing
8 Factory Reset
9 Headset Control
10 RC3 Remote Control Operation for Headset
11 Documents / Resources
- 11.1 Download manual

Sena RC3 Manual

Overview

Getting Started

Note:

When closing the battery slot, insert both ends of the rubber first.
To remove the battery, insert a paper clip through the Battery Release Hole.

Installation

There are three ways of installing the RC3.

Using the Clip

Using the Clip Step 1
Using the Clip Step 2

Using the Hook and Loop Fasteners

Using Hook Fasteners

Using Loop Fasteners

Using the Adhesive Tape

Using the Adhesive Tape Step 1

Using the Adhesive Tape Step 2

Button Operation

Power On/Off

Power On

Power On

Deep Sleep

Deep Sleep

Battery Check

Bluetooth Pairing

NOTE:

You can control the headset using the RC3 only after you pair them together.
The RC3 supports Sena headsets with Bluetooth 4.1.

Factory Reset

Headset Control

To control your headset using the RC3, please refer to the Quick Reference Guide for button operations on functions such as phone, music, and intercom.

RC3 Remote Control Operation for Headset

Type	Operation	Button Command
Basic Function	Volume adjustment	Tap the (+) Button or the (-) Button
Basic Function	Configuration menu	Press the Center Button for 10 seconds
Mobile Phone	Answer phone call	Tap the Center Button
	End phone call	Press the Center Button for 2 seconds
	Voice dial	Press the Center Button for 3 seconds
	Speed dial	Press the (+) Button for 3 seconds
	Reject incoming call	Press the Center Button for 2 seconds
Intercom	Intercom pairing	Press the Center Button for 5 seconds
	Start/end each intercom	Tap the Center Button of any one of the two Remotes Tap the Center Button
	Start group intercom	Tap the (+) Button and the (-) Button
	End all intercoms	Press the Center Button for 1 second
Music	Play/pause Bluetooth music	Press the Center Button for 1 second
Music	Track forward/back	Press the (+) Button or the (-) Button for 1 second
FM Radio	FM radio on/off	Press the (-) Button for 1 second
	Select preset	Press the Center Button for 1 second
	Seek stations	Double tap the (+) Button or the (-) Button
	Scan up FM band	Press the (+) Button for 1 second
	Stop scanning	Press the (+) Button for 1 second
	Save preset while scanning	Tap the Center Button