Creative Zen Hybrid - Wireless Headphones with Hybrid ANC Manual

Creative Zen Hybrid - Wireless Headphones with Hybrid ANC Manual

Also See for ZEN HYBRID:

Advertisement

Creative Zen Hybrid - Wireless Headphones with Hybrid ANC Manual

OVERVIEW

OVERVIEW Part 1
OVERVIEW Part 2

  1. Steel-reinforced Headband
  2. Adjustable Slider with Length Markings
  3. Protein Leather Earpads
  4. ANC / Ambient Mode Button with LED Mode Indicator
  5. Omni-directional Microphone
  6. 3.5 mm AUX-in
  7. LED Status Indicator
  8. LED Charge Indicator
  9. Volume + / - Buttons
  10. Multifunction Button (Power / Bluetooth ® Pairing / Call Mode / Voice Assistant)
  11. USB-C Port (For charging only)
  12. Hybrid ANC Microphones (Feedforward and Feedback)

BLUETOOTH® PAIRING

  1. Button
  1. Action
  1. LED Status Indicator


Bluetooth Pairing

Flashing red and blue

Bluetooth Paired

Flashing blue
NOTE:
  • All first-time pairing requires the headphones to be powered off before Bluetooth pairing mode can be triggered. If the headphones are in use, power it off to trigger pairing mode
  • If the headphones do not establish Bluetooth connection with a new device or if it remains in pairing mode, press the Multifunction button once to connect to the last paired device

CONTROLS

Powering On / Off

  1. Button
  1. Action
  1. LED Status Indicator

Pulsing blue

Solid red, then off

Noise Control

  1. Button
  1. Action
  1. LED Mode Indicator
Solid blue /Off

Exit Ambient Mode*

Ambient Mode
N / A

*If Ambient Mode is already activated, pressing the ANC button once will exit Ambient Mode, while ANC remains on / off based on last mode used.

Playback

  1. Button
  1. Action

Call Mode

  1. Button
  1. Action
  1. LED Status Indicator
Flashing Red /
Off
N/A

Flashing red

BATTERY CHARGING

  1. Action
  1. LED Charge Indicator

  1. Charging

Solid red

  1. Fully charged

Solid green

  1. < 10%

Flashing red

NOTE:
Users are advised not to charge and use the headphones at the same time. Audio playback and all other functions will not be available while it's charging.

MASTER RESET

MASTER RESET

Press and hold the Multifunction and Volume + buttons for 5s to perform a Master Reset. The Multifunction button will flash in purple for 2s upon completion and Creative Zen Hybrid will revert to its default state.

Master Reset is reserved for cases where users encounter issues while the headphones are in use or during situations such as: Bluetooth Pairing failure, random LED blinks, or data reset.

TECHNICAL SPECIFICATIONS

Headphone Drivers

  • Custom-tuned 40 mm Neodymium Driver x 2
  • Frequency Response: 20–20,000 Hz
  • Sensitivity (1 kHz / mW): 117 dB
  • Impedance: 32Ω

Microphones

  • Omni-directional x 5

Bluetooth version

  • Bluetooth 5.0

Bluetooth Profiles

  • A2DP (Wireless Stereo)
  • AVRCP (Remote Control)
  • HFP (Hands-free Profile)

Audio Codecs

  • AAC, SBC

Bluetooth Operating Frequency

  • 2402–2480 MHz

Wireless Operating Range

  • Up to 10m / 33 ft

Wireless Frequency

  • 2.4 GHz

Voice Assistant Support

  • Siri and Google Assistant

Playtime

  • Up to 27 hours with ANC enabled and up to 37 hours with ANC disabled^

Battery Type

  • Rechargeable Lithium-ion Polymer Battery 500 mAh

Charging Interface

  • USB-C (Charging)

Charging Time

  • 1.5 hours

Operating Temperature

  • 0–45°C

Input

  • 5V1A

Maximum RF Output Power

  • 8 dBm

^Based on moderate volume level. Actual battery life will vary with use, settings, songs, and environmental conditions

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Creative Zen Hybrid - Wireless Headphones with Hybrid ANC Manual

Advertisement

Need Assistance?

Do you have a question about the ZEN HYBRID that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents