Scene Run; Scene Set; Dmx Address; Channel Mode - Flash F7300256 User Manual

LED LOGO PROJECTOR 300W IP65 ANIMATION EFFECT • Art No F7300256
5.5 Manual control
This interface is used to control the current lamp, and at the same time automatically
enter the host state (do not receive DMX signal, send DMX signal to the bus to the slave).
The manual menu will display 8 channels according to the standard 8 channels set in the
setup menu.
Options
1CH. Dimming
....
8CH. Zoom
9CH. Reset
5.6 Set up
Options
Operating
mode

Scene Run

Scene Set

DMX Address

Channel Mode 9 CH
DMX Signall

Display

Linear Color
Load Default
0-255
0-255
0-255
0-255
DMX
Auto 1
Auto 2
Random
Sound
Program
Auto, Colse,
Scene 20, Scene
19... 1
Scene Save, Scene Select (1-20) Scene Time, AutoRun (On/Off),
Dimmer, Shutter, Color, Gobo, Roto Gobo RT, Gobo Anim, Focus,
Zoom
1-512
Keep/Clear
On/Off
On/Off
On/Cancel
Press the ‚OK' key to enter the edit state. At this time,
select the hundreds place and press the „Up" and
„Down" keys to change the channel value. Press the
„OK" button again to select the ten digits for editing.
Press again to exit edit state
Slave status: Receive DMX signal from
console or host
Master status: self-propelled and send DMX
signal to slave
Explain
Explain