LED LOGO PROJECTOR 300W IP65 ANIMATION EFFECT • Art No F7300256
3. PRODUCT INFORMATION
Light source: 1pcs 300W LED
Signal: DMX 512
Power consumption: 300W
Color: 8 Colours + White
Gobo: 7 Gobo + 1 (patern effect)
Zoom: Yes
4. INSTALLATION
The unit should be mounted via its screw
holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration
and slipping while operating. Always
ensure that the structure to which you are
attaching the unit is secure and is able to
support a weight of 10 times of the unit's
5. CONNECTION
The device is equipped with the following
interfaces:
1. DMX (in/out): XLR 3(5)-pin socket
2. Power (in/out): powerCON socket
5.1 Connecting DMX signal
The connection is performed using cable
with XLR-female -> XLR-Male plugs.
CAUTION! At the last fixture, the
DMX signal has to be terminated with a
terminator. Solder a 120Ω resistor between
signal (-) and signal (+) into a XLR plug and
plug it in the DMX output of the last fixture.
DMX
Controller
Focus: Yes
DMX standard: DMX 512
Beam angle (min): 11
Beam angle (max): 60
IP Rating: IP65
Dimensions: H(46)xW(24)xD(54) cm
Dim. (box): H(34,5)xW(69)xD(41) cm
Weight (with case):18 kg (9kg)
weight. Also always use a safety cable that
can hold 12 times of the weight of the unit
when installing the fixture. The equipment
must be fixed by professionals. And it must
be fixed at a place where is out of the touch
of people and has no one pass by or under
it.
FEMALE
DMX 512
GROUND
1
DMX +
3
DMX -
2
3-pin XLR
XLR
GROUND
DMX -
DMX +
2
1
3
5-pin XLR
5
4
FEMALE
XLR
DMX 512
1
3
2
MALE
XLR
2
1
3
4 5
MALE
XLR