Table of Contents
Advertisement
7.2.2 Method 2: Wireless connection with Wi-Fi router (Recommeded)
Step 1: Connect your projector to a Wi-Fi router (Refer to Wi-Fi connection method on page 24)
Step 2: Connect your iOS device to the same Wi-Fi router.
Step 3: Tum on Screen Mirroring on your iOS device, select the device name of the projector.
iOS Screen
1: On your iOS device, turn on Wi-Fi and connect to NETGEAR-0045
2: Open Control Center and Screen Mirroring.
3: Select DBPOWER_OBl F
Version: 1.3.a_20200910
7.2.3 Method 3: Wired connection
Enter iOS Screen, connect your iOS device to the projector OUT5V port with a USB cable . Your
iOS device will receive a trust prompt, confirm "trust", then the screen mirroring will start .
Note: If your iOS device doesn't receive a trust prompt after connect to the projector, please use
the original iOS device cable to try again.
m
SSID:DBPOWER_OBl F
password: 12345678
Waiting for connection ...
-22-
support@dbpowershop.com
••
NETGEAR-0045
Advertisement
Table of Contents
