Table of Contents
Advertisement
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
In the opened window, you can specify the following parameters:
Parameter
Enabled
MAC address
Maximum rate
Maximum rate
After specifying the needed parameters, click the SAVE button.
To edit a rule, left-click the relevant rule. In the opened window, change the needed parameters and
click the SAVE button.
To remove a rule, select the checkbox located to the left of the relevant line in the table and click
the DELETE button (
If the switch is moved to the right, the rule is active.
Move the switch to the left to disable the rule.
In the field, enter the MAC address to which the rule will be
applied. You can enter the MAC address of a device connected to
the router's LAN at the moment. To do this, select the relevant
device from the drop-down list (the field will be filled in
automatically).
Upload
Specify the maximum value of the upstream traffic rate (Mbps) or
move the Not limited switch to the right not to limit the maximum
bandwidth of upstream traffic.
Download
Specify the maximum value of the downstream traffic rate (Mbps)
or move the Not limited switch to the right not to limit the
maximum bandwidth of downstream traffic.
).
Page 128 of 209
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
