Table of Contents
Advertisement
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
In the Dynamic IPv6 Addresses section, you can configure IPv6 addresses assignment settings.
Figure 85. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section.
Parameter
Mode of dynamic IPv6
address assignment
Start IPv6
End IPv6
Lease time
Dynamic IPv6 Addresses
Select the needed value from the drop-down list.
Disable: Clients' IPv6 addresses are assigned manually.
•
Stateful: The built-in DHCPv6 server of the router allocates
•
addresses from the range specified in the Start IPv6 and
End IPv6 fields. Also when this value is selected, the
Static IP Addresses section is displayed on the tab.
Stateless: Clients themselves configure IPv6 addresses
•
using the prefix.
The start IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
The end IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
The lifetime of IPv6 addresses provided to clients. The field is
available for editing if the Static value is selected from the Mode
of local IPv6 address assignment list in the Local IPv6
Address section.
Page 104 of 209
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
