Mercedes-Benz GLK 2008 Owner's Manual page 157

Table of Contents

Advertisement

wobuchh,
Tyres and wheels
154
Yes+ Cancel-
To confirm the restart of the tyre pressure
loss warning system:
Press the + button.
X
The following appears in the multi-function
display: Run Flat Indicator restar-
ted.
After a teach-in period, the tyre pressure
loss warning system will monitor the set
tyre pressures of all four tyres.
or
To cancel the restart of the tyre pressure
loss warning system:
Press the - button.
X
The previous settings will not be changed.
Configuring with the luxury multi-func-
tion steering wheel*
Make sure that the key is in position 2 in
X
the ignition lock.
Press the ( or & button to select the
X
Service menu.
Press the $ or % button to select
X
Tyre pressure.
Press #.
X
The following appears in the multi-function
display: Run Flat Indicator active
Restart with OK
Press #.
X
The following appears in the multi-function
display: Tyre press. now OK?
To confirm the restart of the tyre pressure
loss warning system:
Press $ or % to select Yes.
X
Press #.
X
The following appears in the multi-function
display: Run Flat Indicator restarted
After a teach-in period, the tyre pressure
loss warning system will monitor the set
tyre pressures of all four tyres.
or
To cancel the restart of the tyre pressure
loss warning system:
Version: 2.11.4
Press $ or % to select Cancel.
X
Press #.
X
The previous settings will not be changed.
Interchanging the wheels
G
Risk of accident
Interchange the front and rear wheels only if
they have the same dimensions: for example
size, offset, etc.
After every wheel interchange/change, have
the tightening torque checked at a qualified
specialist workshop that has the necessary
specialist knowledge and tools to carry out
the work required. Mercedes-Benz recom-
mends that you use a Mercedes-Benz Service
Centre for this purpose. In particular, work
relevant to safety or on safety-related sys-
tems must be carried out at a qualified spe-
cialist workshop.
The wheels could work loose if they are not
tightened to a torque of 150 Nm.
For safety reasons, Mercedes-Benz recom-
mends that you only use wheel bolts of the
correct size which have been approved for
Mercedes-Benz vehicles.
The wear patterns on the front and rear tyres
differ, depending on the operating conditions.
Interchange the wheels before a clear wear
pattern has formed on the tyres. Front tyres
typically wear more on the shoulders and the
rear tyres in the centre.
Interchange the wheels every 5,000 km to
10,000 km depending on the degree of tyre
wear, provided that the vehicle has the same
size front and rear tyres. Do not reverse the
direction of tyre rotation.
Clean the contact surfaces of the wheel and
the brake disc thoroughly every time a wheel
is interchanged. Check the tyre pressure and,
if necessary, restart the tyre pressure loss
warning system.
* optional

Advertisement

Table of Contents
loading

Table of Contents