Table of Contents
Advertisement
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
the back of your television
Computer
Connect the PC cable from the computer to the PC
terminal on the back of the television.
Press the
to select PC mode.
B
The following signals can be displayed:
VGA: 640 x 480/60 Hz (VESA 480-60)
SVGA: 800 x 600/60 Hz (VESA 600-60)
XGA: 1024 x 768/60 Hz (VESA 768-60)
PLEASE NOTE:
Some PC models cannot be connected to this
television.
An adaptor is not needed for computers with a DOS/V
compatible mini D-sub 15 pin terminal.
A band may appear at the edges of the screen or parts
of the picture may be obscured. This is due to the
strength of the signal, it is not a malfunction.
When PC input mode is selected some of the
television's features will be unavailable e.g. Manual
setting in the SET UP menu, Colour, Tint, DNR and
Black Stretch in the Picture settings menu.
Connecting a computer
Conversion adaptor if required (not supplied)
Audio cable for PC to
television connection
(not supplied)
Signal information for Mini D-sub 15 pin connector
Pin assignment
for RGB/PC
terminal
Pin. No.
Signal name
1
2
3
4
NC (not connected)
5
6
7
8
7
Mini D-sub
15 pin connector
RGB PC cable
(not supplied)
Pin No.
R
9
G
10
B
11
12
NC
13
Ground
14
Ground
15
Ground
Signal name
NC
Ground
NC
NC
H-sync
V-sync
NC
Advertisement
Table of Contents
