INSIGNIA NS-P11W7100 Manual
Also See for NS-P11W7100:

Advertisement

INSIGNIA NS-P11W7100 Manual

NS-P11W7100

Precautions before Use

  1. This production is suitable for use in non-tropic areas below 2,000 meters, and the mark in the nameplate indicates the product is suitable for use in non-tropic areas.
  2. Prevent the Tablet PC from falling to the ground or being strongly impacted otherwise.
  3. Do not use it in the long term in any environment where the air is too cold, too hot (<35°C), too humid or with too much dust. Do not expose the Tablet PC to sunlight.
  4. Avoid using it in the strong magnetic and strong static environment as much as possible.
  5. Once any water or other liquid splashes onto the Tablet PC, close it immediately and do not use it until it dries out.
  6. Do not clean the Tablet PC with any detergent containing chemical element or other liquid to avoid causing damage due to corrosion and becoming damp. If cleaning is really necessary, clean it with dry soft cloth tissue paper.
  7. Our company shall not bear any and all responsibilities for loss or deletion of material inside the machine caused due to abnormal software and hardware operation, maintenance or any other accident.
  8. Please back up your important material at any time to avoid loss.
  9. Please do not disassemble the Tablet PC by yourself; otherwise you will lose the right to warranty.
  10. This product supports the overwhelming majority of mainstream brands of 3G DONGLE, network cards. The cases for 3G Dongle may be different. It is suggested that you test it to make sure it is OK before buying it.
  11. Quick Use Guide and the relevant software shall be updated at any time.
  12. Replacement with incorrect type batteries may cause explosion. Make sure to use original batteries.

Key Layout and Definitions

NS-P11W7100 front view
Key Layout and Definitions - Front view

NS-P11W7100 bottom view
Key Layout and Definitions - bottom view

Description of Keys

Attention: Keyboard is optional, and configure the product according to the specific type of the tablet PC you have bought.

Description of Keys

  1. Movable base keyboard interface: This interface is magnetic, which is convenient for alignment and firmly linking the Table PC and the keyboard.
  2. Keyboard group: The keyboard group provides full size QWERTY key and best typewriting comfortability.
  3. Touch Tablet: Used to control the cursor on the Tablet PC, with the same function as a mouse.
  4. Left key/Right key
  5. Base: Folding base of Tablet PC.

Introduction to Desktop

  1. Windows 10 start image: On the start screen, you can see many programs fixed in the image. These application programs are displayed in the form of "magnet". As long as you click them, you can easily visit them. You need to log on your Microsoft account before the application program completely runs.
    Introduction to Desktop
  2. Image slide applications
    Slide to right
    Image slide applications - Slide to right
    Slide to the right from the left side of the screen to scan the application program in running.

    Slide to left
    Image slide applications - Slide to left
    Slide to the left from the right side of the screen to setting Action Center.

    Slide downward
    Image slide applications - Slide downward
    In start screen, slide from the top of the screen to view application programs.

    Slide with finger
    Image slide applications - Slide with finger
    In start screen, slide finger up and down to view application programs to move the image.
  3. Introduction to app Interface
    Besides the application programs already fixed on the start screen, you can also start other application programs in all application programs, such as other software application progran attached to the Tablet PC.
    Introduction to app Interface - Step 1

    If you want to fix more application programs on the start interface, see the operation below,
    1. Click the properties icon
    2. press and hold the application program magnet for about one second and then let go
    3. Click the Pin to start
      Introduction to app Interface - Step 2

      Conversely, if you want to cancel or delete a certain application in the start screen, (1) lightly touch, press and hold the application program magnet for about one second and then let it go and run, and select
      Introduction to app Interface - Step 3
  4. Start Menu
    Under PC mode, press Start ion, Start Menu will display, including: Start, Device, Setup, Share, and Search Program.
    Start Menu

    Usually: Fire Explorer, Settings, Power, and All apps

    Can Sleep/Shut down/Restart the Tablet PC


    Can let you search the files and application programs in the Tablet PC.


    Can let you set up the Tablet PC.


    Can scan more apps

    Search menu
    Search menu

    Action Center
    Action Center

    Setup Menu
    Setup Menu
    Action Center is a notification center also allows for quick settings like Tablet / PC mode, Wi-Fi, Bluetooth etc.
  5. Multitasking operating interface
    Slide it right from the left side of the screen, Let go when Can see the running applications. We can enter the application, also can be deleted.
    Multitasking operating interface

Basic Operations

1. Sleep, restart and power off
Sleep, restart and power off

This device has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram averaged over 1 gram of tissue.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution:
Changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment.

FCC Statement:
"This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help."

The applicant is responsible for providing proper instructions to the user of the radio device, and any usage restrictions, including limits of exposure durations. The user manual shall provide installation and operation instructions, as well as any special usage conditions, to ensure compliance with SAR and/or RF field strength limits. For instance, compliance distance shall be clearly stated in the user manual.
The user manual of devices intended for controlled use shall also include information relating to the operating characteristics of the device; the operating instructions to ensure compliance with SAR and/or RF field strength limits; information on the installation and operation of accessories to ensure compliance with SAR and/or RF field strength limits; and contact information where the user can obtain Canadian information on RF exposure and compliance. Other related information may also be included.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. this device may not cause interference, and
  2. this device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.

The indoor operation only in the band 5150-5250 MHz

Videos

Insignia Flex NS-P11W7100 11.6" - Review Video

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download INSIGNIA NS-P11W7100 Manual

Advertisement

Need Assistance?

Do you have a question about the NS-P11W7100 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents