Table of Contents
Advertisement
Quick Links
GALAXY POOL DRAIN WITH SUMP
25514-00X-000, 25515-00X-000, 25516-00X-000, 25519-00X-000
VGBA TESTED & CERTIFIED
ANSI-APSP 16 | CPSC
®
All Custom Molded Products main drains are listed and tested in strict accordance
to the requirements of ANSI/APSP - 16 2017, the current standard of reference for
the Virginia Graeme Baker Act, and compliant to the latest Consumer Product
Safety Commission (CPSC) requirements.
For Multiple Drain Use Only | Submerged | Cover Life: 7 Years | Floor or Wall
IAPMO Listed VGB Suction: Compliant to ANSI/APSP - 16 2017 & CPSC
Requirements
Advertisement
Table of Contents
Related Manuals for CMP 25514-00X-000
Summary of Contents for CMP 25514-00X-000
- Page 1 ® GALAXY POOL DRAIN WITH SUMP 25514-00X-000, 25515-00X-000, 25516-00X-000, 25519-00X-000 All Custom Molded Products main drains are listed and tested in strict accordance to the requirements of ANSI/APSP - 16 2017, the current standard of reference for the Virginia Graeme Baker Act, and compliant to the latest Consumer Product Safety Commission (CPSC) requirements.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Please read through the entire manual before installing your new unit. Your pool drain fitting must be installed and operated as specified. A. Safety Instructions & Precautions ..................3 B. Sizing & Specification Reference ..................4 C. Installation & Maintenance Procedures ................5 1. -
Page 3: Safety Instructions & Precautions
The maximum hose length difference between any self-contained SOFA and the tee leading to the pump shall not NOTICE exceed 13 feet (3.96 m). CMP drain covers are only certified for use with CMP sumps and frames. Do not mismatch with parts from other NOTICE manufacturers. -
Page 4: Sizing & Specification Reference
B. SIZING & SPECIFICATION REFERENCE • Suction fitting configuration specific flow ratings MUST NOT be exceeded at any time the pool is open to bathers. • A system must install a suction fitting, or combination of multiple suctions, such that the resulting individual suction system flow rating is greater than the pumping system’s maximum system flow rate. -
Page 5: Installation & Maintenance Procedures
C. INSTALLATION & MAINTENANCE 1. REQUIRED FOR INSTALLATION Your Galaxy Drain includes the following: • Drain Sump Body • Drain Suction Cover • Cover Screws • 2" NPT Plugs (2) • Protective Plaster Installation Cover (gunite models only) • Vinyl Ring & Gaskets (vinyl models only) •... - Page 6 C. INSTALLATION & MAINTENANCE VINYL INSTALLATION: Finish pool surface so that it is completely level with the sump body and cover. Pool finish should not exceed the top of the sump. b. Place gasket on sump body, making sure holes in gasket align with holes in sump flange (a very light application of silicone will help hold the gasket in place).
-
Page 7: Maintenance & Inspection
C. INSTALLATION & MAINTENANCE FIELD BUILT SUMP INSTALLATION: h. Refer to TABLE 1 for flow rates Minimum Pipe Depth (A) Side Port: 1-3/4in; Bottom Port: 4-3/4in Ledge Width (B): 1-1/8in Minimim Pipe Length Before Pipe Size Reduction: 8.5in For additional information on proper drain installation refer to The Association of Pool & Spa Professionals ANSI/APSP/ ICC-7 2013 Standard and the Virginia Graeme Baker Pool &... -
Page 8: Diagram & Measurements
D. PART DIAGRAMS AND MEASUREMENTS 8.5” 7.7” 0.98” 6.4” GALAXY MAIN DRAIN DEEP BODY IMAGE 4 - DIMENSIONS... -
Page 9: Parts List
G. PARTS LIST CMP P/N DESCRIPTION 61050 - 550 - 250 SCREWS FOR 25514 61051 - 052 - 028 SCREWS FOR 25515 61004 - 083 - 212 SCREWS FOR 25516 61051 - 058 - 030 SCREWS FOR 25519 25507 - 100 - 010*... - Page 11 Record Information on this System Below & Keep for Your Records Installer _______________________________________________________________ Purchased From _______________________________________________________ Installation Date _____________________________ Model Number ______________________________ Pool Size in Gallons __________________________ CMP Customer Service & Tech Support Toll Free: 1-800-733-9060 FAX: 770-732-7115 support@c-m-p.com Warranty Questions RMA@c-m-p.com Support Resource &...
- Page 12 1021sb CUSTOM MOLDED PRODUCTS | 36 HERRING ROAD, NEWNAN, GA 30265 | WWW.C-M-P.COM...
Need help?
Do you have a question about the 25514-00X-000 and is the answer not in the manual?
Questions and answers