Page 1
Daybed - White Assembly Instructions 3464227 - Please keep for future reference Dimensions Length - 195cm Depth - 96cm Height - 81,5cm Weight - 29kg Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 or e-mail: order@fl...
Safety and Care Advice Safety and Care Advice Important – Please read these instructions fully before starting assembly 80-10106-20 Daybed IMPORTANT! KEEP FOR FUTURE REFERENCE PLEASE DISPOSE OF PACKAGING MATERIAL. PLASTIC BAGS CAN BE DANGEROUS TO YOUNG CHILDREN WARNI N G! Not suitable for children under 4 years. WARNING! Do not place this child’s bed near heat sources, windows and other furniture.
Page 3
Safety and Care Advice Important – Please read these instructions fully before starting assembly • We do not • Check you have all the • Do not stand or put weight on recommend the components and tools listed on the product, this could cause use of power pages 2 and 3.
If you have damaged or missing components, Components - Parts call the Customer Helpline: 0045 7668 8055 Please check you have all the parts listed below Endrail x4 Leg x2 Leg x2 (72.5x4.3x4.3cm) (79.4.7x4.3x4.3cm) (87.7x6.5x2.0cm) No. 12-04307251-20 No. 12-04307941-20 No. 12-02008772-20 Slat x14 Distance piece x1 (89.7x6.5x1.5cm)
Page 5
Components - Fittings Please check you have all the fi ttings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fi ttings may be supplied than are required. No. 3922-06014 No. 3901-40030 No.
Page 6
Assembly Instructions Step 1 Attach the dowels bedsides , back rail and back rail It may be necessary to tap the dowels in very gently with a small hammer. Step 2 Attach endrails to leg with screws using the allen key. Note the position of the grooves.
Page 7
Assembly Instructions Step 4 Attach connecting bolts to dowel screws Insert the dowel screws into the holes in back rails Fasten with a fl atblade screwdriver. Horizontal Note that the hole in connecting bolt should be facing horizontal with back rails Step 5 Insert threaded bushes into the distance piece...
Page 8
Assembly Instructions Step 7 Attach the assembled backrail panel and bedside to the assembled headboards by placing the dowels into the holes in legs Push barrel nuts into the 2 small holes in in bedside . Push 1 connecting bolt through legs to meet the barrel nuts...
Page 9
Assembly Instructions Step 9 Place one slat in the centre of the bed. Follow the measurement . Place two slats in the ends of the bed. Follow the measurement . 15 mm Push the bedsides together whilst attaching 843 mm middle slat to the bed with two chipboard...