Table of Contents
Advertisement
Classic
antique bunkbed frame
190x90 cm
-
6566878
- Please keep for future reference
Dimensions
Length - 195cm
Depth - 96/102cm
Height - 146cm
Weight - 43kg
Important
– Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@fl exa.dk
Issue 3 - 03/09/15
Advertisement
Table of Contents
Related Manuals for Flexa 6566878
Summary of Contents for Flexa 6566878
- Page 1 Classic antique bunkbed frame 190x90 cm Assembly Instructions 6566878 - Please keep for future reference Dimensions Length - 195cm Depth - 96/102cm Height - 146cm Weight - 43kg Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 or e-mail: order@fl...
- Page 2 Safety and Care Advice Important – Please read these instructions fully before starting assembly • We do not • Check you have all the • Do not stand or put weight on recommend the components and tools listed on the product, this could cause use of power pages 2, 3 and 4.
- Page 3 If you have damaged or missing components, Components - Parts call the Customer Helpline: 0045 7668 8055 Please check you have all the parts listed below Tread (w.4 holes) x1 Slat x30 List f.safety x2 (89.7x6.5x1.5cm) (31.8x2.8x1.2cm) (35.0x6.5x2.0cm) No. 12-01508971 No.
- Page 4 Components - Parts Please check you have all the parts listed below Leg long x4 Leg short x4 (82.6x4.3x4.3cm) (61.8x4.3x4.3cm) No. 12-04308262-7 No. 12-04306181-7 Safety rail 3/4 x2 (149.7x6.5x2.0cm) No. 12-02014971-7 Safety rail 1/1 x2 (186.7x6.5x2.0cm) No. 12-02018673-7 Ladderside bunkbed x1 (114.8x8.9x2.0cm) No.
- Page 5 Components - Fittings Please check you have all the fi ttings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fi ttings may be supplied than are required. No. 3922-06014 No. 3901-45040 No.
- Page 6 Assembly Instructions Step 1 Insert dowels bedsides – and to all the safety rails and . It may be necessary to tap the dowel in very gently with a small hammer. Repeat same procedure for all bedsids all safety rails Step 2 Insert the connecting double bolts...
- Page 7 Assembly Instructions Step 3 Attach leg to endrails with 4 screws using the allen key Attach leg to endrails with 4 screws using the allen key Repeat same procedure for both headboard and footboard Step 4 Slide 1 panel between endrail followed by 8 panels and fi...
- Page 8 Assembly Instructions Step 5 Attach bedside both safety rails to the bed fi rstly by placing the dowels in holes in the legs. Push barrel nuts into the 2 small holes in bedside push 1 connecting bolt through each leg meet barrel nuts then fasten with the allen key.
- Page 9 Assembly Instructions Step 8 Attach the 2 beds by putting the one bed (with legs ) in top of the other bed. Attach the connecting double bolt in legs with the upper bed by screws through legs Step 9 Push 2 assembly screws through the leg to meet the safety rails then...
- Page 10 Assembly Instructions Step 11 Place 1 slat (No.8) in the bed, follow the measurement. PUSH Push the bedsides . together when attaching the slat to the bed with 2 screws Position 12 mm the remaining 14 slats in the bed with a distance of 64 mm between each.
- Page 11 Assembly Instructions Step 12 Attach the safety list inside the bed, on the Max mattress height ! front safety rails Should be in the center of the front guards between the slats. Attach it to the safety rails and bedside with chipboard screws Follow the measurement.
- Page 12 Assembly Instructions Bunkbed as 2 single beds Note: To acheive the single bed look shown on the picture, one end of the upper bunk (assembled parts should be swapped over with the lower bunk (assembled parts If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 E-mail: order@fl...