Page 1
Cabin bed - White Assembly Instructions 1478538 - Please keep for future reference Dimensions Length - 195cm Depth - 96cm Height - 71cm Weight - 20kg Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 or e-mail: order@fl...
Safety and Care Advice Important – Please read these instructions fully before starting assembly 80-10104-20 IMPORTANT! KEEP FOR FUTURE REFERENCE PLEASE DISPOSE OF PACKAGING MATERIAL. PLASTIC BAGS CAN BE DANGEROUS TO YOUNG CHILDREN WARNI N G! Not suitable for children under 4 years. WARNING! Do not place this child’s bed near heat sources, windows and other furniture.
Page 3
Safety and Care Advice Important – Please read these instructions fully before starting assembly • We do not • Check you have all the • Do not stand or put weight on recommend the components and tools listed on the product, this could cause use of power pages 2 and 3.
If you have damaged or missing components, Components - Parts call the Customer Helpline: 0045 7668 8055 Please check you have all the parts listed below Endrail curved x2 Endrail x2 Leg x4 (71.7x4.3x4.3cm) (87.7x9.2x2.0cm) (87.7x6.5x2.0cm) No. 12-04307172-20 No. 12-02008772-20 No.
Page 5
Components - Fittings Please check you have all the fi ttings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fi ttings may be supplied than are required. No. 3922-06014 No. 3901-40030 No.
Page 6
Assembly Instructions Step 1 Attach the dowels bedsides It may be necessary to tap the dowels in very gently with a small hammer. Step 2 Attach endrails to leg with screws using the allen key. Repeat same procedure for second headboard DOWN Step 3 Slide T&G panel...
Page 7
Assembly Instructions Step 4 Attach bedsides the legs by pushing the barrel nuts into the small holes in the bedsides . Push connecting bolts through the legs meet the barrel nuts Then fasten with the allen key. Step 5 Repeat same procedure as described in “Step 4”...
Page 8
Assembly Instructions Step 6 Place one slat in the centre of the bed. Follow the measurement . Place two slats in the PUSH ends of the bed. Follow the measurement . Push the bedsides together whilst attaching middle slat to the 15 mm bed with two chipboard screws...