Windows 2000 - Linksys BEFCMU10 Quick Installation

B. The next screen will ask "What do
you want Windows to do?" Select
Search for the best driver for your
device (Recommended) and click
Next.
B
C. Windows will then ask you where it
should search for the drivers. Select
CD-ROM drive and click Next.
D. Windows will notify you that it has
C
identified the appropriate driver and
is ready to install it. Click Next to
install the driver.
Note: Windows might ask you for your
Windows 98 CD-ROM. Insert it into
the CD-ROM drive and enter d:\win98
in the box that appears (where "d" is
the letter of your CD-ROM drive.) If
your Windows files are on your hard
D
drive, try c:\windows\options\cabs as
the path.
E. Windows will display a screen that indicates that the drivers have been
installed successfully. Click Finish to complete the installation. When
asked if you want to restart your PC, remove all diskettes and CD-ROMs
from the PC and click Yes. If Windows does not ask you to restart your
PC, click Start, choose Shut Down, choose Restart, then click Yes.
Your driver installation is complete. Go to Step 5 to activate your
account and finish the installation of the EtherFast ® Cable Modem.
Windows ME
A. Insert the Setup CD into your CD-ROM drive.
B. Windows will ask you for the location of the best driver. Select Automatic
search for a better driver (Recommended) and click Next.
B
Note: Windows might ask you for your Windows Me CD-ROM. Insert it into
the CD-ROM drive and enter d:\win9x in the box that appears (where "d" is
the letter of your CD-ROM drive.) If your Windows files are on your hard
drive, try c:\windows\options\cabs as the path.
C. Windows will display a screen that indicates that the drivers have been
installed successfully. Click Finish to complete the installation. When
asked if you want to restart your PC, remove all diskettes and CD-ROMs
from the PC and click Yes. If Windows does not ask you to restart your
PC, click Start, choose Shut Down, choose Restart, then click Yes.
Your driver installation is complete. Go to Step 5 to activate your
account and finish the installation of the EtherFast ® Cable Modem.

Windows 2000

A. Insert the Setup CD into your CD-ROM drive.
B. The Welcome to the Found New
Hardware Wizard screen will
appear. Click Next.
C. The next screen will be Install
Hardware Device Drivers. Select
Search for a suitable driver for
my device (recommended) in the
check boxes and click Next.
C
D. You will be prompted for the loca-
tion of the drivers. Select CD-
ROM drives and click Next.
E. Windows will locate the driver on
D
the disk and display this screen.
Click Next.
F. Windows will display a screen that indicates that the drivers have been
installed successfully. Click Finish to complete the installation. When
asked if you want to restart your PC, remove all diskettes and CD-ROMs
from the PC and click Yes. If Windows does not ask you to restart your
PC, click Start, choose Shut Down, choose Restart, then click Yes.
Your driver installation is complete. Go to Step 5 to activate your
account and finish the installation of the Cable Modem.
EtherFast ®
Windows XP
A. Insert the Setup CD into the CD-ROM drive.
B. When the Found New Hardware Wizard screen appears to confirm that the
USB Modem has been identified by your PC, select Automatic search
for a better driver (Recommended) and click Next.
C. Windows will now search for the
driver software. Click Next.
D. When Windows has completed
installing the driver, click Finish.
Restart your PC if asked to do so.
D
Your driver installation is complete. Go to Step 5 to activate your
account and finish the installation of the Cable Modem.
EtherFast ®
Activating Your Account
Contact your Cable ISP to activate your account. Usually, your Cable ISP
will need a MAC Address for your in order to set
EtherFast ® Cable Modem
up your account. The 12-digit MAC address is printed on a bar code label
on the bottom of the . Once you have given them
EtherFast ® Cable Modem
this number, your Cable ISP should be able to activate your account.
Your EtherFast ® Cable Modem is now ready to use.
For setup information or any other questions, refer to the User Guide.
QI-BEFCMU10 ver. 2-050802NC BW
W W W . L I N K S Y S . C O M