Advertisement
MOTORS 25HP+
Install Guide for Motors 25HP+
WB.M25+.02
2
STEP 1
Remove the center pre-installed bolt located
on the Transom to accommodate the Motor
Template.
Riveted hulls may require a screw on the
transom cap to be removed for properly
mounting the template.
STEP 2
Mount the Motor Template onto the Transom
of the Boat
Ensure Motor Template is sitting flush with the
Transom.
STEP 3
Align the right edge of the template with the
center keel dimple and clamp in place.
Confirm template location with Lead Rigger/
Shop Foreman.
Do not drill pilot holes prior to confirming
template location with Lead Rigger/Shop
Foreman.
https://support.legendboats.com/
NOTE
NOTE
ATTENTION
Advertisement
