Detection; Signals Detected; Audio Alerts; Visual Display - Cobra ESD 9560 Operating Instructions Manual

4
D E T E C T I O N

Signals Detected

The tables on the following pages show
you the types of signals your ESD-9560
will detect, as well as the voice and
visual alerts it provides for each one.

Audio Alerts

A distinctly different alert tone is used for
each type of signal detected (including
separate tones for each laser signal). For X,
K, and Ka band radar signals, the tones will
repeat faster as you approach the signal
source. The repeat rate of the tones gives
you useful information about the signal
detected. (See Responding to Alerts,
page 19.)
16

Visual Display

An indication of the type of signal
detected will appear in the DigiView™
Data Display. During X, K, and Ka alerts,
you will also see from 1 to 5 vertical bars,
indicating the strength of the signal
detected.
SIGNAL STRENGTH CHART
Weakest
Signal
1
2
3
4
5
Strongest
Signal
Type of Signal
X band radar
Radar
K band radar
Ka band radar
X 5 K
Type of Signal
Laser* LTI 20-20™*
LTI Ultra-Lyte™*
Kustom Signals ProLaser™*
Kustom Signals ProLaser III™*
PLEASE NOTE: Beep rate changes with different laser alerts
Laser Laser
20/20... UltraLyte...
Type of Signal
Strobe Alert™* 3M Opticom™ or Tomar
PLEASE NOTE: There are different tones for each Safety Alert
* your ESD-9560 provides LaserEye 360° detection of these signals
®
4
D E T E C T I O N
Visual Display
X
K
Ka
5 Ka 5
Visual Display
Laser
20/20...
Laser
UltraLyte...
Laser
Pro Laser...
Laser
Pro Laser 3...
Laser Laser
Pro Laser... Pro Laser 3...
Visual Display
® V Emergency Vehicle...
(flashing)
®
Emergency Vehicle
17