Related Manuals for Daewoo DAS360L
Summary of Contents for Daewoo DAS360L
- Page 1 DAS360L Screwdriver USER'S MANUAL www.daewoopowerproducts.com Manufactured under license of Daewoo International Corporation, Korea...
-
Page 2: Table Of Contents
INDEX 1. PARTS............................... 2 2. SAFETY INFORMATION.......................... 3 3. LAYOUT..............................5 4. POPER USE............................. 6 5. TECHNICAL DATA........................... 6 6. BEFORE STARTING THE EQUIPMENT....................6 7. OPERATION............................. 7 8. CLEANING AND MAINTENANCE......................8 9. DISPOSAL AND RECYCLING......................... 8 10. WARRANTY............................9... -
Page 3: Parts
1. PARTS... -
Page 4: Safety Information
IMPORTANT! When using equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating manual with due care. Keep this manual in a safe place, so that the information is available at all times. If you give the equipment to any other person, give them these operating instructions as well. - Page 5 c) Make sure that the appliance cannot start up accidentally. Ensure that the electric tool is switched off before you connect it to the power supply and/or insert the battery, or pick up or carry the tool. If your tool or if you connect the appliance to the mains when it is switched on, this can lead to accidents.
-
Page 6: Layout
6. Service a) Have your electric tool repaired only by trained personnel using only genuine spare parts. This will ensure that your electric tool remains safe to use. Hold the equipment by the insulated handles when carrying out work during which the screw or the plug-in tool could strike concealed power cables. Contact with a live cable may also make the metal parts of the equipment live and cause an electric shock. -
Page 7: Poper Use
4. PROPER USE The cordless screwdriver is designed for tightening and undoing screws. The machine is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this. -
Page 8: Operation
7. OPERATION 6.1 Charging the battery (Fig. 1) The battery is protected from exhaustive discharge. An integrated protective circuit automatically switches off the equipment when the battery is flat. In this case the bit chuck will cease to turn. WARNING! Do not press the ON/OFF switch anymore if the protective circuit has actuated. Thismay damage the battery. -
Page 9: Cleaning And Maintenance
IMPORTANT! You switch on the screwdriver, make sure that it is correctly locked in the angle posi- tion in question. 6.6 Battery capacity indicator (Fig. 4/Item 8) press the button auf ON/Switch. The battery capacity indicator (4) indicates the charge state of the battery on 3 colored LEDs. All LEDs illuminate: The battery is fully charged The yellow and red LED illuminate: The battery has an adequate remaining charge. -
Page 10: Warranty
WARRANTY CARD Product model Date of sale Company Serial number Client's signature Username The product is in good conditions and fully complete. Read and agree the terms of the warranty. GUARANTEE The warranty period starts from the date of sale of the products and covers 2 years for all power products. During the warranty period, free failures caused due to the use of poor-quality materials in the production and manufacturer workmanship admitted fault are removed. - Page 11 Manufactured under license of Daewoo International Corporation, Korea...
Need help?
Do you have a question about the DAS360L and is the answer not in the manual?
Questions and answers