Alert Audio Setting; Weather/All Hazards Alert Radio Mode; Weather/All Hazards Alert; Vg-2 Alert ® Audio Setting - Cobra ESD - 9230 W X Operating Instructions Manual

10 band extra sensory detection radar/laser detector
Table of Contents

Advertisement

3
O P E R AT I O N • S E T T I N G S
VG-2 Alert
®
Audio Setting
The ESD-9230 WX is undetectable by police
VG-2 detection devices, and will alert you
when such a device is in use near your
vehicle. During the alert, the unit continues
to detect other signals. You can choose
whether or not you want your unit to
sound VG-2 alerts.
The factory setting is VG-2 Audio On.
Procedure
To turn off
While no signal is
being detected,
VG-2
press and hold
audio alert
the DIM button
for two seconds.
To turn on
While no signal is
being detected, press
VG-2
and hold the DIM
audio alert
button for two
seconds again.
10
DIM button
Press and hold for 2 seconds
Tone
Voice
Visual Display
1 beep
"VG-2
V
audio off"
will blink
once in
the display
V
2 beeps
"VG-2
audio on"
will blink
twice in
the display.
X
K
L
V
S
Cty Wx
/
Ka

Weather/All Hazards Alert

Radio Mode
The Weather/All Hazards Alert Radio feature
of your ESD-9230 WX allows you to listen to
Weather/All Hazards Alert Radio transmitted
Procedure
Tone
Press and release the
2 beeps
WX button to activate
Weather/All Hazards Alert
Radio mode. If a signal is
received, you will hear
the radio broadcast.
NOTE: The Wx in the LED acts as a signal strength meter. A weak signal will cause it to flicker.
If the signal is lost, your unit
1 beep
will automatically return to
radar mode.
Selecting a
Weather Channel
1.
Procedure
Tone
If you do not hear a
none
broadcast, press and
release the CITY/Wx
(STEP) button to cycle
through the 10 channels
until a signal is received.
2.
Procedure
Tone
To turn off Weather mode,
1 beep
press and release the
WX button again.
O P E R AT I O N • S E T T I N G S
by National Oceanic and Atmospheric
Administration (NOAA) in your area. In
Weather mode, your unit will continue to
detect radar signals and provide alerts.
The factory setting is Weather Off.
WX button
Press and release
Voice
Visual Display
"weather on"
Wx
"weather signal
none
lost"
X
K
L V S
Cty
Wx
/
Ka
Voice
Visual Display
none
none
Voice
Visual Display
"weather off"
none
3
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Esd–9230 wx

Table of Contents

Save Article as PDF