Muting An Alert; Auto Mute Mode; Voice/Tone Setting - Cobra ESD - 9230 W X Operating Instructions Manual

3
O P E R AT I O N • S E T T I N G S

Muting an Alert

Your ESD-9230 WX allows you to quickly
turn off an audio alert by momentarily
pressing the MUTE button. If you press the
MUTE button a second time during the alert,
the audio alert will be turned back on.
MUTE button
Press and release
Procedure
To turn Press and release
the MUTE button
Auto Mute
while no alert
off
is occurring.
To turn Press and release
the MUTE button
Auto Mute
again while no
on
alert is occurring.
8

Auto Mute Mode

Auto Mute will automatically reduce the
audio volume of all alerts after 4 seconds
for as long as the signal is detected.
The factory setting for Auto Mute is ON.
Tone Voice Visual Display
1 beep "auto mute off" none
none
2 beeps "auto mute on"

Voice/Tone Setting

You can set your ESD-9230 WX to sound
alerts with either a voice or a tone. You can
change settings by using the MUTE button.
In Voice Alert™ mode you will first hear
several tones, then a voice message
announcing the type of signal detected,
followed by more tones. In Tone Alert
mode, you will hear the tones only.
The factory setting is Voice Alert™ mode.
Procedure
To change from While no signal is
being detected,
Voice Alert™
press and hold the
to Tone Alert
MUTE button for
two seconds.
To change from
While no signal is
being detected,
Tone Alert back
press and hold the
to Voice Alert™
MUTE button for
two seconds again.
O P E R AT I O N • S E T T I N G S
MUTE button
Press and hold for 2 seconds
Tone Voice Visual Display
1 beep "tone alert" none
none "voice alert" none
3
9